HydroPro Heat Pump Type Inverter

Starting at: £1,226.00

All prices are inclusive of VAT

NEW FOR 2017

The HydroPro Heat Pump Type Inverter offers an efficient and economical way to heat your pool water. This stylish new range for 2017 is ideal for above-ground pools and smaller in-ground pools, providing up to 13kW of heat per every 1kW of energy*. This 'all seasons' system works down to temperatures as low as -5oC, and is therefore suitable for use throughout most of the year. What's more, this smart system allows you to automatically vary the heating capacity to suit weather conditions using three different modes:

Power Mode: Provides 100% output to increase the temperature of the pool in a short space of time

Smart Mode: Provides 75%-100% output to help regulate the temperature of the pool

Silent Mode: Provides 50%-75% output to help maintain the temperature of the pool while keeping energy consumption & noise levels low 

By using the 'Power', 'Smart', and 'Silent' modes you can reduce the noise levels and the amount of energy used by the system by up to 50%.

*When the ambient air temperature is 27oC, water temperature is 26oC & humidity is 80%. At ambient air temperature of 15oC, water temperature 26oC & humidity 70% the HydroPro Inverter can provide up to 8.2kW of heat per every 1kW.

HydroPro Inverter heat pumps are easy to install, and feature: a black corrosion-resistant ABS cabinet; an efficient, corrosion-resistant titanium heat exchanger; a low noise fan and compressor; an easy-to-use LCD display; and.an integrated flow switch which detects the water-flow and automatically starts and stops the heater when the pool pump is turned on and off. The range also uses an environmentally friendly gas within the compressor which has no harmful effect on the ozone layer. All models include Soft Start (lowers start-up voltage required for the inverter compressor, protecting the system & extending the life of the unit).

Pumps should ideally be installed outdoors though if an indoors installation is required the system must be vented to the outdoors. As with any heat pump, you should always allow for adequate air flow to the unit. 

Please note that the maximum pool volume for these pumps depends on many factors, including the outside air temperature. Units should be installed by a qualified electrician. Please call us on 0208 941 6618 or email us for more information and to discuss your requirements.


Please call us on 0208 941 6618 or email us for more information or technical advice.

Choose Your Option:
HydroPro Heat Pumps QTYPRICE

*All prices are inclusive of VAT
Delivery: Free Delivery for Mainland UK

© AG Budget
Web Design by Tractus