Safety Covers

3 to 1 geared crank - suitable for Walu covers up to 9 x 4.5m.

7 to 1 geared crank - suitable for Walu covers up to 11 x 5.5m.

Walu-Move - clever non motorised easy cover mover. For pools up to 10m x 5m
An enhanced wheeled system designed to raise the leading edge of the cover, lifting it clear of the pool, reducing friction and greatly reducing the effort required in moving the safety cover onto and off the pool. The wheel system lifts the cover and turning the vertical crank winds the cover and drives the wheels smoothly along the pool. For covering your pool, simply pulling the central unwinding strap easily draws the cover back onto the pool. When covered, the wheels are pivoted onto their end allowing your swimming pool cover to be safely tensioned.

Walumatic Motorised Winder - suitable for covers up to 10 x 5m
Crank Handle driven by a 24 volts geared motor. Powered by a re-chargeable nickel-cadmium battery similar to that used with power tools. Comes complete with 20 minute re-charger. Offers the standard operation of a crank handle but without the manual effort. Can be used on either side to wind the cover up, retracting it off the pool. Unwinding your swimming pool safety cover is achieved in the normal way, simply by pulling the central unwinding strap.

Walu Cool Self Propelled winder Just walk along holding the lightweight controller attached by a coiled wire. Powered by a re-chargeable battery. Can be used on either side.