trap heat from the sun

warm your pool the green way

The prospect of "free" heat from the sun is an increasingly economic & popular choice. This is one of the most environmentally friendly sources of renewable energy. We advise that the total area of solar panels is between 50 and 70% of your pool surface area. Solar heating is still highly effective even if the weather is dull or overcast. Some people also have a small gas or electric heater for example, to give an extra boost early or late in the season or at night. The prices below include the necessary connectors and manifolds to join the panels to each other. Please ask us to quote you if you would also like us to supply the plumbing to take the pool water to and from your pool filtration. We normally recommend that this pipework includes a couple of valves and tees, so that you can by-pass the solar panels when the weather is cold. It is even possible to purchase a kit to automate this process.The optional automatic differential temperature controller is £193.109. This needs to be combined with an automatic 3-way valve, £417.892.  It is also possible to use a 2-way valve, for £, but this is not recommended. For roof mounting we advise you also purchase a vacuum release valve, £10. We can configure panels to suit virtually any area. Please ask for a quotation, giving the length and breadth available. The examples below are for approximate guidance only.

sun star solar heating

SunStar Solar Panels

High quality ready made 4' wide solar heating modules. Can be placed on ground or roof, sloping or flat. Vacuum release valve for roof installation +£10     BROCHURE

Any number can be joined together sideways to create the area you need, and extra panels can be added in the future if required. The panels can be laid on any surface, horizontal or sloping. These solar collectors are ideal if you want to install them on a sloping roof. Each panel has its own slotted fixing pad from which it hangs longways down the slope.
SunStar - ready made modules - approx area sq.ft. (sq.m.) 30 (2.76) 42 (3.84) 49 (4.56) 84 (7.68)
"Sunstar" 30 7'7"x4' price per module
£274.848
Buy



"Sunstar" 40 10'5" x 4' price per module

£295.283
Buy


"Sunstar" 50 12'6" x 4' price per module


£315.718
Buy

"Heat Kit" 21'5" x 4' - includes flexible hoses for smaller pools
We do not recommended joining several heatkits together.



£458.761
Buy
Optional Automatic controller

£193.109
Buy
automatic valve - 2-way

£
Buy
or 3-way (recommended)

£417.892
Buy

el nino cheap heating

Low Cost Solar Panels for Splasher Pools

El Nino for splashers and small above ground pools. Easiest simply to lay on the ground. Optional frame support kit available.   El Nino brochure

approx area of each module in sq.ft. (or sq.m.)
basic kit 39 (3.6) expansion kit 19 (1.8)    
El Nino solar heating for splasher pools £125
Buy
£70
Buy


booster pump - for roof installation with splasher pool pumps £
Buy
optional luxury angled frame kit 

£
Buy




sun pool free warmth

SunPool modular solar panel system

SunPool Solar for all other pools. Can be placed on ground or roof. For sloping roofs, optional support kits are available very cheaply. For installations higher than about 4m, a vacuum breaker valve is required.    SunPool brochure
approx area of each module in sq.ft. (or sq.m.) 3m long module 43 (4) 5m long module 54 (5)    
SunPool Solar System £285
Buy
£345
Buy


Solar Control System including sensor with thermostat, plus motorised valve £519
Buy
Vacuum breaker (if above 4m high) £39
Buy
roof support kit per module £29
Buy

solar matt flexible

Solarmatt on site assembly system

Tough flexible tube kits for simple on-site assembly. Very adaptable solar heating system, lay on ground or flat roof. Two or more mats can be laid together for desired total area. Vacuum release valve for roof installation+£10   BROCHURE

Solarmatt comes as a kit with separate manifolds and tubing, designed to be cut to length and assembled on site. Solarmatt is best for flat surfaces, including flat roofs and on the ground next to the pool, where it is quite happy to be walked on.There is plenty of flexibility as regards making optimum use of the space available. The width of a Solarmatt array = its area divided by its length. The same area can be long and thin or short and fat. One clever solution is to take a long system and fold it in a U-shape etc. This not only saves money, but it also means that the flow and return are both at the same end. Please telephone us for advice.
Solarmatt - typical layouts - approx area ft2 (sq.m.)
90 (8) 135 (12) 180 (16) 225 (20) 270 (24) 315 (28)
60ft between manifolds £438.327
Buy
£642.674
Buy
£826.588
Buy
£1020.72
Buy
£1225.07
Buy
£1429.41
Buy
40ft between manifolds £468.979
Buy
£703.979
Buy
£877.675
Buy
£1102.46
Buy
£1296.59
Buy
£1521.37
Buy
30ft between manifolds £499.631
Buy
£714.196
Buy
£918.544
Buy
£1153.54
Buy
£1368.11
Buy
£1613.33
Buy
20ft between manifolds £540.5
Buy
£795.935
Buy
£1020.72
Buy
£1286.37
Buy
£1521.37
Buy
£1797.24
Buy
15ft between manifolds £591.588
Buy
£867.457
Buy
£1122.89
Buy
£1419.2
Buy
£1664.41
Buy
£1960.72
Buy


shopping cart

Collect all your project ideas together in one place - in your own personal custom web page. Just click "add", "price", "quote" or "buy" next to any products you want to include in your list of possibilities. You can save your "Package-Builder" list at any time, and then go back and change it whenever you like.


020-8979-1667     www.agbudget.co.uk     2010

A G Budget Pools  incorporating   1swim.com
The swimming pool professionals.   Lowest UK prices for 25 years.

©2010 A G Budget Swimming Pools | Special Offers | Basket | Q&A Help | About Us | Web | Terms & Conditions | Site Map