HydroPro Heat Pump Type P On/Off
£599.00 – £2,355.00 (inc. VAT)
Special Offer Until Stocks Last – Limited Time Only!
HydroPro Heat Pump Type P On/Off helps to extend the swimming season, it helps you enjoy your pool investment for a longer time during the year.
Features Include:
- works down to -5°C
- Quiet running
- For heating and cooling
- Easy temperature control with LCD display
- Automatic defrost
- High efficiency, COP up to 6.4
- Cabinet made of ABS
- R32 gas, which has a 3x lower GWP (Global Warming Potential) than the R410A
- 2 year warranty for heat pump, 7 year warranty for compressor and heat exchanger (subject to manufacturer’s conditions. Not warrantied for frost damage or poor winterisation)
- Winter cover included
- Maximum pool volume depends on environmental conditions
A black corrosion-resistant ABS cabinet, an efficient, corrosion-resistant titanium heat exchanger; a low noise fan and compressor for quiet running; an easy-to-use LCD display, integrated flow switch which detects the water-flow and automatically starts and stops the heater when the pool pump is turned on and off.
The range uses R32 gas, an environmentally friendly gas, within the compressor which has no harmful effect on the ozone layer. R32 gas has 3 times lower GWP (Global Warming Potential) than the R410A gas. In addition, it also comes with automatic defrosting, a winter pool cover, a 2-year warranty for the heat pump, and a 7-year warranty for the compressor and heat exchanger.
Pumps should ideally be installed outdoors though if an indoors installation is required the system must be vented to the outdoors. As with any heat pump, you should always allow for adequate air flow to the unit.
Please note that the maximum pool volume for these pumps depends on many factors, including the outside air temperature. Units should be installed by a qualified electrician.
Please call us on 0208 941 6618 or email us for more information and to discuss your requirements.
Units supplied with:
- Rubber feet (to reduce wear & tear, and limit noise)
- Winter cover
Optional Extras:
- Bypass kit (recommended)
Bypass Kit for swimming pool heat pumps which allows you to control the flow of water to your heat pump. Winterise your heat pump without affecting the flow of water to your swimming pool and maintain your heat pump quickly and effectively.
Basic Set Contains:
2 x PVC T-Piece 50mm 16bar 4 x PVC Tube 50mm 10cm 10bar 3 x PVC Ball Valve 50mm 16bar 4 x SS Hose Clamp 32 x 44mm 4 x ABS Hose tail white 50 x 32mm/38mm 1 x Griffon PVC glue 1 x Griffon Cleaner
|
Universal Set Contains:
2 x PVC Elbow 90 50mm 1 bar 2 x PVC T-Piece m 16ba50mm 16bar 6 x PVC Tube 50mm 10cm 10bar 3 x PVC Ball Valve 50mm 16bar 2 x PVC Socket 50mm 16bar 6 x SS Hose Clamp 32 x 44mm 6 x ABS Hose tail white 50 x 32mm/38mm 1 x Griffon PVC glue 1 x Griffon Cleaner 2 x Pool hose 38mm blue double cuffs 1.5m |