Vent-Axia HR300RW6 Semi-Remote Unit

The Vent-Axia HR300RW6 Heat Recovery Unit is a semi-remote unit designed for mounting in an external wall. The HR300RW6 controls internal relative humidity and is an ideal solution for controlling moisture, mould, and odours in the pool environment whilst recovering up to 70% of the heat from the stale pool air. It is suitable for domestic and commercial applications.

The HR300RW6 is an ‘intelligent’, high performance, and energy efficient system that simultaneously extracts air from inside and supplies fresh air from outside. Both air streams are passed through a specially designed plastic heat exchanger which extracts heat from the stale air from the pool hall, and pre-warms the fresh air supply. This heat exchanger retrieves heat that would otherwise be lost, whilst consuming no power at all itself.

The HR300RW6 is designed for installation in an external wall. Two 150mm diameter spigots are provided for ducting connection to internal supply and extract grilles. The unit requires a 280mm (width) x 380mm (height) hole, and is mounted through the wall in a vertical position. A minimum overhang of 70mm on the outside and 50mm inside is required. Units should be level to assist in-built condensate drainage. An extension sleeve is available for walls up to 650mm (approx. 25.5in) thick.

The unit is available in three speeds: 75m³/h, 210m³/h and 280m³/h.

Please call us on 0208 941 6618 or email us for more information or technical advice