Image of the Elecro Single Classic HR UV-C.
Image of the Elecro HR UV-C 30 Schematics.

Elecro Single Classic H.R.UV-C – Up To 55m3 Pool

£499.00 (inc. VAT)

With the H.R.UV-C, up to 95% reflectivity is achieved (if you compare this to stainless steel reactors only 20 to 28% reflection is typically achieved). The H.R.UV-C is 100% sea and saltwater compatible, unlike stainless steel units that suffer corrosion issues.

The super reflective properties of the Elecro H.R.UV-C optimises the UV-C radiation and dramatically increase the performance. The inside surface casing is extremely repellent and therefore self-cleaning. Intelligent electronics indicate when the lamps are not producing sufficient UV-C and need to be changed. Ensuring your unit is always performing optimally.

  • Made in UK
  • Unrivalled reflection – up to 95% reflection is achieved drastically improving the efficiency
  • Highest UV reflective index on the market equating to extreme efficiency
  • No harmful gases or by products
  • Neutralises bacteria, viruses, algae and fungai that traditional chemicals cannot
  • Powerful sterilisation reducing the use of chemicals
  • Compatible with sea and salt water chlorination
  • A narrow and extended chamber ensures maximum exposure to the powerful UV-C
  • Average lamp life expectancy – 2 years
  • Easy to use and install, can be retrofitted to any existing pool system.
  • Intelligent lamp life indicator – signals when the lamps are no longer producing sufficient UV-C and need to be changed. Ensuring your unit is always performing optimally
  • Supplied with T-Piece and flow switch
  • Available in 3 sizes
  • 2 year warranty (consumable parts excluded)

Please call us on 0208 941 6618 or email us for more information or technical advice.

Technical Specifications

Control TypeAnalogue
Lamp Output55W
Max Pool Vol m³55
Net Weight6.67kg
Gross Weight9.05kg
Gross Volume0.0996m³
Control TypeAnalogue
Lamp Output55W
Max Pool Vol m³55
Net Weight6.67kg
Gross Weight9.05kg
Gross Volume0.0996m³

 

  • 2-year warranty (consumable parts excluded)
  • Vertical or horizontal installation
  • 2-year average lamp life expectancy

NOTE: When mounting the UV, it is essential to leave a clearance space of at least 1 metre from one side of the unit to allow access to replace the lamp(s) and/or quartz sleeve(s) when required. Both the lamps and the quartz sleeve can be replaced from either end of the unit; if installing vertically the 1m clearance space must be above or below the unit, if installing horizontally the 1m clearance space must be to the left or right of the unit.

WARNING: The unit must be installed within a dry, permanent weather-proof area. In any case, where water or moisture enters the enclosure, the warranty will be void.

Caution: If the unit is unused during the winter months, it must be drained to prevent frost damage. Water must not be allowed to freeze inside the unit as this will cause severe damage.

Manual:
View Manual
Data Sheet:
View Data Sheet
Related Products